Siemens SITRANS P - Manual (Page 165)

SITRANS P measuring instruments for pressure
Diaphragm seals of flange design
For gage and absolute pressure,
directly fitted on transmitter
2/165 Siemens FI 01 · 2009
2
Selection and Ordering data Order No. Ord.code
Diaphragm seal D) 7 M F 4 9 1 0 -
Directly fitted to a pressure transmitter
SITRANS P for pressure 7MF403
7 and
7MF423 7 together with Order code "V01" (vac-
uum-proof design) and 7MF802 7 1) ; must be
ordered separately
7 7 7 7 7 7 7 7
Process connection
• Vertical (pressure transmitter upright)
0
• Horizontal 2
Nominal diameter and nominal pressure
• DN 50
PN 40 A
PN 100 B
• DN 80 PN 40 D
PN 100 E
• DN 100 PN 16 G
PN 40 H
• 2 inch Class 150 L
Class 300 M
Class 600 N
Class 1500 P
• 3 inch Class 150 Q
Class 300 R
Class 600 S
• 4 inch Class 150 T
Class 300 U
Class 400 V
Smooth sealing face to DIN 1092-01, form B1 or
B2, or to ASME B16.5 125 ... 250 AA or RFSF
Other version
Add Order code and plain text:
Nominal diameter: ...; Nominal pressure: ... Z J 1 Y
Wetted parts materials
• Stainless steel 316L
- without foil A
- with PTFE coating E 0
- with ECTFE coating 2) F
- with PFA coating D
• Monel 400, mat. No. 2.4360 G
• Hastelloy C276, mat. No. 2.4819 J
• Hastelloy C4, mat. No. 2.4610 U
• Tantalum K
Other version
Add Order code and plain text:
Wetted parts materials: ... Z K 1 Y
Tube length
• Without tube
0
• 50 mm • (1.97 inch) 1
• 100 mm • (3.94 inch) 2
• 150 mm • (5.90 inch) 3
• 200 mm • (7.87 inch) 4
Other version:
Add Order code and plain text:
Tube length: ... 9 L 1 Y
Filling liquid
• Silicone oil M5
1
• Silicone oil M50 2
• High-temperature oil 3
• Halocarbon oil (for measuring O
2
) 4
• Glycerin/water 3) 6
• Food oil (FDA listed) 7
Other version
Add Order code and plain text:
Filling liquid: ... 9 M 1 Y
1) With 7MF802 7 and the measuring cells Q, S, T and U also order the vac-
uum-tight version.
2) For vacuum on request.
3) Not suitable for use in low-pressure range.
D) Subject to export regulations AL: N, ECCN: EAR99H.
Selection and Ordering data Order code
Further designs
Please add "-Z" to Order No. and specify Order code.
Spark arrestor A01
With spark arrestor for mounting on zone 0 (including
documentation) for transmitters for pressure and abso-
lute pressure
Quality inspection certificate (Factory calibration) to
IEC 60770-2 C11
to IEC 60770-2
Acceptance test certificate C12
to EN 10204, section 3.1
Vacuum-proof design V01
for use in low-pressure range for transmitters for
pressure
Calculation of span of associated pressure
transmitter Y05
Enclose filled-in questionnaire with order
Selection and Ordering data Order No. Ord.code
Diaphragm seal D) 7 M F 4 9 1 0 -
Directly fitted to a pressure transmitter
SITRANS P for pressure 7MF403
7 and
7MF423 7 together with Order code "V01" (vac-
uum-proof design) and 7MF802 7 1) ; must be
ordered separately
7 7 7 7 7 7 7 7
© Siemens AG 2008