Siemens SITRANS P - Manual (Page 138)

SITRANS P measuring instruments for pressure
SITRANS P Accessories
Accessories / spare parts for SITRANS P
P300 and DS III series
2/138 Siemens FI 01 · 2009
2
Selection and Ordering data Order No.
Spare parts / Accessories
Replacement measuring cell for differential
pressure and PN 420 (MWP 6092 psi) for
SITRANS P, DS III, DS III PA and
DS III FF series 7 M F 4 9 9 5 -
7 7 7 7 7 - 0 D C 0
Measuring cell filling Measuring cell cleaning
Silicone oil Standard 1
Measured span
2.5 ... 250 mbar
(1.004 ... 100.4 inH
2
O) D
6 ... 600 mbar (2.409 ... 240.9 inH
2
O) E
16 ... 1600 mbar (6.424 ... 642.4 inH
2
O) F
50 ... 5000 mbar (20.08 ... 2008 inH
2
O) G
0.3 ... 30 bar (4.35 ... 435 psi) H
Wetted parts materials
(stainless steel process flanges)
Seal diaphragm Parts of measuring cell
Stainless steel Stainless steel A
Hastelloy Stainless steel B
Gold 1)
1) Not together with max. span 600 mbar (240.9 inH
2
O)
Gold L
Process connection
Female thread ¼-18 NPT with flange
connection
• Sealing screw opposite process connection
- Mounting thread M12 to DIN 19213 1
- Mounting thread 7 /
16
-20 UNF to EN 61518
3
• Vent on side of process flange
- Mounting thread M12 to DIN 19213 5
- Mounting thread 7 /
16
-20 UNF to EN 61518
7
Non-wetted parts materials
• Stainless steel process flange screws
2
Further designs Order code
Please add "-Z" to Order No. and specify Order
code.
O-rings for process flanges
(instead of FPM (Viton))
• PTFE (Teflon)
A20
• FEP (with silicone core, approved for food) A21
• FFPM (Kalrez, compound 4079) A22
• NBR (Buna N) A23
Acceptance test certificate C12
to EN 10204-3.1
Stainless steel process flanges for vertical dif-
ferential pressure lines H03
without process flanges K00
Selection and Ordering data Order No.
Spare parts / Accessories
Replacement measuring cell for level
for SITRANS P, DS III, DS III PA and
DS III FF series 7 M F 4 9 9 6 -
7 7 7 7 7 - 0 D C 0
Measuring cell filling Measuring cell cleaning
Silicone oil Standard 1
Rated measuring range
250 mbar
(3.63 psi) D
600 mbar (8.70 psi) E
1600 mbar (23.2 psi) F
5 bar (72.5 psi) G
Wetted parts materials
(stainless steel process flanges)
Seal diaphragm Parts of measuring cell
Stainless steel Stainless steel A
Process connection of low-pressure side
Female thread ¼-18 NPT with flange
connection
• Sealing screw opposite process connection
- Mounting thread M10 to DIN 19213 0
- Mounting thread 7 /
16
-20 UNF to EN 61518 2
Non-wetted parts materials
• Stainless steel process flange screws
2
Further designs Order code
Please add "-Z" to Order No. and specify Order
code.
O-rings for process flanges
(instead of FPM (Viton))
• PTFE (Teflon)
A20
• FEP (with silicone core, approved for food) A21
• FFPM (Kalrez, compound 4079) A22
• NBR (Buna N) A23
Acceptance test certificate C12
to EN 10204-3.1
without process flanges K00
© Siemens AG 2008