Siemens SITRANS P - Manual (Page 180)

SITRANS P measuring instruments for pressure
Quick-release clamp-on seals
For pressure and absolute pressure
2/180 Siemens FI 01 · 2009
2
Selection and Ordering data Order No. Ord. code
Quick-release clamp-on seal D) 7 M F 4 9 5 0 -
for SITRANS P pressure transmitters for
pressure
7MF403
7 and 7MF423 7 together with Order
code "V01" (vacuum-proof design) and
7MF802
7 1) ; must be ordered
separately
Filling liquid: Food oil (FDA listed)
Material: Stainless steel 316L
1) With 7MF802 7 and the measuring cells Q, S, T and U also order the vac-
uum-tight version.
7 7 A 0 7 - 7 B 7 7 7
Nom. diam. Nom. press.
• Connection to DIN 11851 with screw necks
- DN 25 PN 40 2 B
- DN 40 PN 40 2 D
- DN 50 PN 25 2 E
- DN 65 PN 25 2 F
- DN 80 PN 25 2 G
- DN 100 PN 25 2 H
• Clamp connection
- 1½ inch PN 40 4 L
- 2 inch PN 40 4 M
- 2½ inch PN 40 4 N
- 3 inch PN 40 4 P
Other version
Add Order codes and plain text:
Nominal diameter: ...
9 H 1 Y
Nominal pressure: ... Z J 1 Y
Filling liquid
• Glycerin/water
2)
2) Not suitable for use in low-pressure range.
6
• Food oil (FDA listed) 7
Other version
Add Order code and plain text:
Filling liquid: ... 9 M 1 Y
Connection to transmitter
• Direct
0
Through capillary, length: 3)
3) Max. capillary length, see section "Technical description"
D) Subject to export regulations AL: N, ECCN: EAR99H.
• 1.0 m (3.28 ft) 2
• 1.6 m (5.25 ft) 3
• 2.5 m (8.20 ft) 4
• 4.0 m (13.1 ft) 5
• 6.0 m (19.7 ft) 6
• 8.0 m (26.25 ft) 7
• 10.0 m (32.8 ft) 8
Other version
Add Order code and plain text:
Length of capillary: ... 9 N 1 Y
Selection and Ordering data Order code
Further designs
Please add "-Z" to Order No. and specify Order code.
Quality inspection certificate (Factory calibration) to
IEC 60770-2 C11
Acceptance test certificate C12
to EN 10204, section 3.1
Vacuum-proof design V01
for use in low-pressure range
© Siemens AG 2008