Siemens SITRANS P - Manual (Page 137)

SITRANS P measuring instruments for pressure
SITRANS P Accessories
Accessories / spare parts for SITRANS P
P300 and DS III series
2/137 Siemens FI 01 · 2009
2
E) Combinations of the versions marked with E) are subject to the export
regulations AL: 2B230, ECCN: N.
F) Subject to export regulations AL: 9I999, ECCN: N.
Selection and Ordering data Order No.
Spare parts / Accessories
Replacement measuring cell for absolute pres-
sure (from the differential pressure series) for
SITRANS P, DS III, DS III PA and DS III FF series F) 7 M F 4 9 9 3 -
7 7 7 7 7 - 0 D C 0
Measuring cell filling Measuring cell cleaning
Silicone oil
Standard 1
Inert liquid Grease-free 3
Measured span
8.3 ... 250 mbar a
(0.12 ... 3.63 psi a) E) D
43 ... 1300 mbar a (0.62 ... 18.9 psi a) E) F
0.16 ... 5 bar a (2.32 ... 72.5 psi a) E) G
1 ... 30 bar a (14.5 ... 435 psi a) H
5.3 ... 100 bar a (76.9 ... 1450 psi a) K E
Wetted parts materials
Seal diaphragm
Parts of measuring cell
Stainless steel Stainless steel A
Hastelloy Stainless steel B
Hastelloy Hastelloy C
Tantalum Tantalum E
Monel Monel E) H
Gold Gold L
Process connection
Female thread ¼-18 NPT with flange connection
• Sealing screw opposite process connection
- Mounting thread M10 to DIN 19213 0
- Mounting thread 7 /
16
-20 UNF to EN 61518 2
• Vent on side of process flange 1)
1) Not for span "5.3 ... 100 bar (76.9 ... 1450 psi)"
- Mounting thread M10 to DIN 19213 4
- Mounting thread 7 /
16
-20 UNF to EN 61518 6
Non-wetted parts materials
• Stainless steel process flange screws
2
Further designs
Please add "-Z" to Order No. and specify
Order code.
Order code
O-rings for process flanges
(instead of FPM (Viton))
• PTFE (Teflon)
A20
• FEP (with silicone core, approved for food) A21
• FFPM (Kalrez, compound 4079) A22
• NBR (Buna N) A23
Acceptance test certificate C12
to EN 10204-3.1
Process connection G½A D16
Remote seal flanges D20
(not together with K01, K02 and K04)
Vent on side for gas measurements H02
Process flanges
• without
K00
• with process flange made of
- Hastelloy K01
- Monel K02
- Stainless steel with PVDF insert
max. PN 10 (MWP 145 psi)
max. temperature of medium 90 °C (194 °F)
K04
Selection and Ordering data Order No.
Spare parts / Accessories
Replacement measuring cell for differential
pressure and PN 32/160 (MWP 464/2320 psi) for
SITRANS P, DS III, DS III PA and DS III FF series 7 M F 4 9 9 4 -
7 7 7 7 7 - 0 D C 0
Measuring cell filling Measuring cell cleaning
Silicone oil
Standard 1
Inert liquid Grease-free 3
Measured span
PN 32 (MWP 464 psi)
1 ... 20 mbar
1)
1) Not suitable for connection of remote seal
(0.4015 ... 8.03 inH
2
O) B
PN 160 (MWP 2320 psi)
1 ... 60 mbar
(0.4015 ... 24.09 inH
2
O) C
2.5 ... 250 mbar (1.004 ... 100.4 inH
2
O) D
6 ... 600 mbar (2.409 ... 240.9 inH
2
O) E
16 ... 1600 mbar (6.424 ... 642.4 inH
2
O) F
50 ... 5000 mbar (20.08 ... 2008 inH
2
O) G
0.3 ... 30 bar (4.35 ... 435 psi) H
Wetted parts materials
(stainless steel process flanges)
Seal diaphragm Parts of measuring cell
Stainless steel Stainless steel A
Hastelloy Stainless steel B
Hastelloy Hastelloy C
Tantalum 2)
2) Only together with max. spans 250, 1600, 5000 and 30000 mbar
(3.63, 23.2, 72.5 and 435 psi).
Tantalum E
Monel 2) Monel H
Gold
2)
Gold L
Process connection
Female thread ¼-18 NPT with flange connection
• Sealing screw opposite process connection
- Mounting thread M10 to DIN 19213 0
- Mounting thread 7 /
16
-20 UNF to EN 61518 2
• Vent on side of process flange
- Mounting thread M10 to DIN 19213 4
- Mounting thread 7 /
16
-20 UNF to EN 61518 6
Non-wetted parts materials
Stainless steel process flange screws
2
Further designs
Please add "-Z" to Order No. and specify Order code.
Order code
O-rings for process flanges
(instead of FPM (Viton))
• PTFE (Teflon)
A20
• FEP (with silicone core, approved for food) A21
• FFPM (Kalrez, compound 4079) A22
• NBR (Buna N) A23
Acceptance test certificate C12
to EN 10204-3.1
Remote seal flanges D20
(not together with K01, K02 and K04)
Vent on side for gas measurements H02
Stainless steel process flanges for vertical
differential pressure lines H03
(not together with K01, K02 and K04)
Process flanges
• without
K00
• with process flange made of
- Hastelloy K01
- Monel K02
- Stainless steel with PVDF insert
max. PN 10 (MWP 145 psi)
max. temperature of medium 90 °C (194 °F)
K04
© Siemens AG 2008