NewTek TriCaster 2 Elite (3 RU) - Manual (Page 96)

P a g e | 78
FIGURE 80 (TC2 ELITE SHOWN)
A set of controls located below the preset bin (Figure 80) allows you to control connected PTZ cameras, or
to affect sources supporting Pan and Scan features in similar fashion (you might think of these sources as
providing a sort of ‘virtual PTZ’ functionality).
Note: NewTek NC1 Spark units connected by NDI will show Virtual PTZ (Pan and Scan) controls. With Exclusive
Features, most Switcher sources feature Virtual PTZ.
– see Appendix A: Exclusive Features .
SLOW, MEDIUM , and FAST preset buttons complement the numeric Speed control slider at right. These affect
the speed of the transition from the current position to that stored in a newly selected preset.
The Options group, when expanded, reveals White Balance options along with a menu that allows you to
invert the operation of the Joystick on individual axes (both in the interface and on connected hardware
control panels).
Note: Focus, Iris, and White Balance features are only shown when a PTZ cameras is connected to the input.
However,
features in the Input Configuration panel’s Image tab, discussed next, can provide similar
functionality to White Balance automation.