Section 3.8 tally lights – NewTek TriCaster 2 Elite (3 RU) User Manual
Page 40

P a g e | 22
FIGURE 14
These supplemental monitors are referred to as
Multiview
outputs, and can display a variety of optional
layouts that can be selected and configured at any time in the
Live Desktop
.
Note: A mismatch of output format and connection type is possible at times. For example, imagery in a
Graphics player may not match the current output format or the selected connection type. Display mismatches
can often be handled, but in rare cases the source may simply not be shown.
SECTION 3.8
TALLY LIGHTS
TriCaster provides
Tally Light
support to allow you to connect external tally lights and
similar devices.
These typically provide a red LED for a
video input selected on the Switcher’s
Program
row.
(NDI outputs also natively support tally over the network, without a separate connection.)
Note: Some third party tally solutions are listed at:
https://www.newtek.com/solutions/newtek-developer-network/
FIGURE 15