NewTek TriCaster 2 Elite (3 RU) - Manual (Page 76)

P a g e | 58
way to illustrate that it can be logically divided into five horizontal bands, described from top to bottom
in the following table.
SECTION 6.3
CONTROL TYPES
You will find various control types used repeatedly in the Live Desktop . Some examples are shown in the
table below.
Control Type Type Examples Usage
Numeric Slider Gain, Pan Drag in line with the control’s orientation to
raise or lower the current value.
• Quick access to interface options and important tools, including Publish and Macros along with
Record , Stream, Workspace and Timecode options.
1 - Dashboard
• User configurable layouts – monitor live inputs along with internal sources (such as DDRs , M/Es ,
and Buffers ) plus Look Ahead Preview and Program o utput
• Waveform and Vectorscope monitors
2 - Monitors
• Effect mode – control up to four primary video layers plus 4 overlay channels
• Mix mode – secondary switcher controls plus 4 overlay channels
• Each M/E includes dedicated an extensive complement of Keyers , transition generators,
scaler/positioners, and more
• The two Matrix Router (OUTPUTS 1-4 & 5-8) provide eight routable crosspoints with NDI outputs.
(In TC2 Elite)
3 - M/Es & Matrix Router
• Switcher rows – Program and Preview rows
• Transition controls – T-bar and Delegate buttons
• DSK video layer configuration and controls
4 - Switching
• Internal Media Players and Buffers )
• PTZ (robotic) camera controls
• Audio (mixer) – input configuration, level control, EQ and Compressor/Limiters
5 - Tabbed Control Modules