Ricoh PJ WU6181N 6200-Lumen WUXGA LCD Projector (No Lens) - Manual (Page 9)

vii
Important Information
Safety Labels of This Machine
1 Do not look into the lens while the projector is on. Serious damage to your eyes could result. Do not cover the lens
with the lens cap or equivalent while the projector is on. Doing so can lead to melting of the cap due to the heat emit-
ted from the light output. Do not place any objects, which are easily affected by heat, in front of the projector lens.
Doing so could lead to the object melting from the heat that is emitted from the light output.
2 Do not try to touch the ventilation outlet on the left front (when seen from the front) as it can become heated while the
projector is turned on and immediately after the projector is turned off. Parts of the projector may become temporarily
heated if the projector is turned off with the Power button or if the AC power supply is disconnected during normal
projector operation.
Use caution when picking up the projector.
3 Do not remove any screws except the lamp cover screws. Do not block or cover the vents.
4 To replace the lamp, first unplug the power cord then wait for more than 1 hour.
The lamp might be broken. Be careful of pieces of broken glass.
*The label changes depending on the destination.
3
2
1
4
21
21