Ricoh PJ WU6181N 6200-Lumen WUXGA LCD Projector (No Lens) - Manual (Page 18)

3
1. Introduction
• Simultaneous display of 2 images (PIP/PICTURE BY PICTURE)
Two images can be projected simultaneously with a single projector.
There are two types of layouts for the two images: “picture-in-picture” in which a sub-picture is displayed on the main picture,
and “picture-by-picture” in which the main and sub pictures are displayed next to each other.
• Multi-screen projection using multiple projectors
This projector is equipped with multiple HDMI input & output terminals that can connect multiple projectors in a daisy chain.
A high quality picture is achieved by dividing and projecting high resolution videos among the various projectors.
Furthermore, the boundaries of the screens are smoothed using an edge blending function.
* Both the composite video signal from each input connector as the computer, BNC, and BNC (CV), and the S-video signal
from the BNC (Y/C) Input connector are not output from HDMI OUT Connector of this projector.
• Seamless switch function for smoother screen changes when switching the signal
When the input connector is switched, the image displayed before switching is held so that that the new image can be switched
to without a break due to absence of a signal.
• Supports HDMI 3D format
This projector can be used to watch videos in 3D using commercially-available active shutter-type 3D eyewear and 3D emitters
that support Xpand 3D.
Network
• Supported by wired LAN/wireless LAN (wireless LAN unit sold separately)
Ethernet Port *Video can be transmitted from a computer equipped with a RF-45 port that is connected to a wired LAN to
the projector, and the projector can also be controlled from the computer.
In addition, the all models can also be used over a wireless LAN by using a wireless LAN unit sold separately.
• LAN-compatible Viewer
The projector’s built-in Viewer allows you to view images or movie files in the shared folder of your PC connected to a wired
or wireless LAN.
* The Viewer supports the Media Sharing function of Windows Media Player 11.
• CRESTRON ROOMVIEW compatibility
The projector supports CRESTRON ROOMVIEW, allowing multiple devices connected in the network to be managed and con-
trolled from a computer or controller.
• Convenient utility software (User Supportware) provided as standard
The 2 utility software stored in the attached CD-ROM (Projection Utility (for Windows/Mac OS), Advanced Network Utility
(for Windows), ) may be used. Projection Utility (for Windows) may be started up and used from a USB memory or SD card
available commercially even without installing on a computer.
Projection Utility (for Windows/Mac OS), Advanced Network Utility (for Windows)
Energy-saving
• Energy-saving design with a standby power consumption of 0.11 watts (100-130 V)/0.16 watts (200-240 V)
When the on-screen menu’s standby mode is set to “NORMAL”, the power consumption in the standby mode is 0.11 watts
(100-130 V)/0.16 watts (200-240 V).
• “Eco mode” for low power consumption and “Carbon Meter” display
The projector is equipped with an “eco mode” for reducing power consumption during use. Furthermore, the power-saving
effect when the eco mode is set is converted into the amount of reductions of CO
2
emissions and this is indicated on the
confirmation message displayed when the power is turned off and at “Information” on the on-screen menu (CARBON METER).