Ricoh PJ WU6181N 6200-Lumen WUXGA LCD Projector (No Lens) User Manual
Page 156
141
5. Using On-Screen Menu
SECURITY
This will turn on or off the encryption mode for secure transmission.
To use encryption, specify a WEP key or encryption key. Select your
security type appropriate for your computer and the wireless LAN unit.
DISABLE ..........................Will not turn on the encryption feature. Your
communications may be monitored by someone.
WEP(64bit) ...................Uses 64-bit datalength for secure transmission.
WEP(128bit) .................Uses 128-bit datalength for secure transmission.
This option will increase privacy and security
when compared to use of 64-bit datalength
encryption.
WPA-PSK/WPA2-PSK/WPA-EAP/WPA2-EAP
.............................................These options provide stronger security than
WEP.
NOTE:
• The security type, WEP key, and encryption key settings must be the same as communication
devices such as PC or access point in your wireless network.
• When you use [SECURITY], your image transmission speed will slow down.
• [WPA-PSK], [WPA-EAP], [WPA2-PSK] and [WPA2-EAP] are not available when [AD HOC] is
selected from [NETWORK TYPE].
—
SSID
Enter an identifier (SSID) for wireless LAN. Communication can be done
only with equipment whose SSID matches SSID for your wireless LAN.
Up to 32 alphanumeric
characters (case sensi-
tive).
NETWORK TYPE
Select communication method when using wireless LAN.
INFRASTRUCTURE .......Select this option when communicating with
one or more equipment connected to the
wireless or wired LAN network via a wireless
access point.
AD HOC ...............................Select this option when using the wireless LAN
to directly communicate with a computer in
peer-to-peer mode.
—
CHANNEL
Select a channel. Available channels vary depending on the country
and region. When you select [INFRASTRUCTURE], make sure that the
projector and your access point are on the same channel; when you
select [AD HOC], make sure that the projector and your computer are
on the same channel.
—
When [WEP(64bit)] or [WEP(128bit)] is selected for [SECURITY TYPE]
KEY SELECT
Selects one WEP key from the four keys below.
KEY1, KEY2, KEY3, KEY4
Enter a WEP key.
• Maximum number of characters
Option
Alphanumeric (ASCII)
Hexadecimal (HEX)
WEP 64bit
5
10
WEP 128bit
13
26