Appendix – Ricoh PJ WU6181N 6200-Lumen WUXGA LCD Projector (No Lens) User Manual
Page 251
236
10. Appendix
Lens shift table
Applicable type
Drawing number
Lens unit
Replacement Lens
Type8
Replacement Lens
Type2
Standard Lens
Type1
Replacement Lens
Type3
Replacement Lens
Type4
WUXGA Type
①
50% V
50% V
50% V
50% V
50% V
②
10% V
10% V
10% V
10% V
10% V
③
20% H*
30% H
30% H
30% H
30% H
④
20% H*
30% H
30% H
30% H
30% H
WXGA Type
①
50% V
60% V
60% V
60% V
60% V
②
10% V
10% V
10% V
10% V
10% V
③
20% H
30% H
30% H
30% H
30% H
④
20% H
30% H
30% H
30% H
30% H
XGA Type
①
35% V
50% V
50% V
50% V
50% V
②
10% V
10% V
10% V
10% V
10% V
③
20% H
30% H
30% H
30% H
30% H
④
20% H
30% H
30% H
30% H
30% H
* For WUXGA Type, the shift range in the horizontal direction is up to 15% H when using the lens unit “Replacement Lens Type8” to project a
screen exceeding Model 150.
Ex.: When projecting on a 150" screen
The explanation is for a XGA Type projector (4:3 panel) with a Replacement Lens Type2
lens
fitted.
• Please replace the screen dimensions and maximum shift value in the calculations for the WXGA Type and WUXGA Type projec-
tors (16:10 panel) as well.
According to the tables of screen sizes and dimensions (
→
page
), H = 304.8 cm, V = 228.6 cm.
Adjustment range in the vertical direction: The projected image can be moved upwards 0.5 × 228.6 cm = 114 cm, downwards
0.1 × 228.6 cm = 22 cm (when the lens is at the center position). For a ceiling/front installation, the above figures are inverted.
Adjustment range in the horizontal direction: The projected image can be moved to the left 0.3 × 304.8 cm = 91 cm, to the right
0.3 × 304.8 cm = 91 cm.
* Figures differ by several % because the calculation is approximate.