Ricoh PJ WU6181N 6200-Lumen WUXGA LCD Projector (No Lens) User Manual
Page 111
96
5. Using On-Screen Menu
[SIGNAL TYPE]
Selection of RGB and component signals. Normally, this is set to [AUTO]. Please change the setting if the color of the image
remains unnatural.
AUTO ................................Automatically distinguishes RGB and component signals.
RGB ....................................Switches to the RGB input.
COMPONENT ..............Switches to the component signal input.
[VIDEO LEVEL]
Selection of the video signal level when connecting an external device to the HDMI 1 IN terminal, HDMI 2 IN terminal, DisplayPort
input terminal of the projector.
AUTO ................................The video level is switched automatically based on the information from the device outputting the signal.
Depending on the connected device, this setting may not be made properly. In this case, switch to [NOR-
MAL” or “ENHANCED” from the menu and view with the optimum setting.
NORMAL ........................This disables the enhanced mode.
ENHANCED ...................This improves the image’s contrast, expressing the dark and light sections more dynamically.
SUPER WHITE .............The video contrast is improved and the dark areas appear more dynamic.