Projecting images stored in a usb memory device, Starting the viewer – Ricoh PJ WU6181N 6200-Lumen WUXGA LCD Projector (No Lens) User Manual
Page 226
211
9. Using the Viewer
❷
Projecting images stored in a USB memory device
This section explains the basic operation of the Viewer.
The explanation provides the operational procedure when the Viewer toolbar is set to the factory default.
Preparation: Before starting the Viewer, store images to the USB memory using your computer.
Starting the Viewer
1. Turn on the projector. (
→
)
2. Insert the USB memory into the USB port of the projector.
NOTE:
• Do not remove the USB memory from the projector while it’s LED flashes. Doing so may
corrupt the data.
TIP:
You can a USB memory insert the projector when the drive list screen is displayed.
3. Press the “9/USB-A” button.
The screen will change to the viewer display and a screen showing
a list of the drives will be displayed after 2 to 3 seconds.
TIP:
• Press the button to display the viewer with the main body operation. Refer to page
for the selection method.
• For more information about the drive list screen, see page
.
• To display graphics in a shared folder, see page
; to display still images or movie
files in a media server, see page
.
USB
Ethernet