Turning on the projector – Ricoh PJ WU6181N 6200-Lumen WUXGA LCD Projector (No Lens) User Manual
Page 31
16
2. Projecting an Image (Basic Operation)
Standby
Blinking
Power On
Steady red light
Blinking blue
light
Steady blue
light
❸
Turning on the Projector
1. Remove the lens cap.
2. Press the
(POWER) button on the projector cabinet or the
POWER ON button on the remote control.
The POWER indicator will light up in blue from red and then start
blinking. After that, the image will be projected onto the screen.
TIP:
• When the message “PROJECTOR IS LOCKED! ENTER YOUR PASSWORD.” is displayed,
it means that the [SECURITY] feature is turned on. (
→
page
)
• When the ECO message is displayed, it means that [ON] is selected for [ECO MES-
SAGE]. (
→
)
• Pressing buttons such as power button and MENU button will make sound. To
turn off the beep sound, select [OFF] for [BEEP] from the menu. (
→
page
)
After you turn on your projector, ensure that the computer or
video source is turned on.
NOTE: A blue screen (blue background) is displayed when no signal is being input (by
factory default menu settings).
Eternet
(
→
page
)