Ricoh PJ WU6181N 6200-Lumen WUXGA LCD Projector (No Lens) - Manual (Page 113)

98
5. Using On-Screen Menu
❻
Menu Descriptions & Functions [DISPLAY]
[PIP/PICTURE BY PICTURE]
SUB INPUT
Select the input signal to be displayed in the sub-display.
Please refer to “4-2 Displaying Two Pictures at the Same Time” (
→ page 65 ) for details on the operation.
MODE
Select either PIP or PICTURE BY PICTURE when switching to 2-screen display.
PICTURE SWAP
The videos in the main display and sub-display will be switched.
Please refer to “4-2 Displaying Two Pictures at the Same Time” (
→ page 67 ) for details.
PIP SETTING
Select the display position, position adjustment and size of the sub-display in the PIP screen.
START POSITION ......Selection of the display position of the sub-display when switching to the PIP screen.
HORIZONTAL POSITION
.............................................Adjust the display position of the sub-display in the horizontal direction. The respective corners will serve
as reference points.
VERTICAL POSITION
.............................................Adjust the display position of the sub-display in the vertical direction. The respective corners will serve
as reference points.
SIZE ...................................Select the display size of the sub-display.