About the projector’s [network settings – Ricoh PJ WU6181N 6200-Lumen WUXGA LCD Projector (No Lens) User Manual
Page 21
6
1. Introduction
About the Projector’s [NETWORK SETTINGS]
“NETWORK SETTINGS” need to be carried out when connecting this projector to a wired or wireless LAN.
The following two types of [NETWORK SETTINGS] 1 and 2 can be used. Use the [NETWORK SETTINGS] 1 and 2 for different pur-
poses depending on the software and function described in the table below.
1. “NETWORK SETTINGS” under [SETUP] in the on-screen menu (
→
Page
)
Or “NETWORK SETTINGS” in the HTTP server (
→
Page
)
2. “NETWORK SETTINGS ” in the application menu (
→
Page
Or “NETWORK SETTINGS” in the HTTP server (
→
Page
)
1. NETWORK SETTINGS
2. NETWORK SETTINGS (MM)
Wired LAN
OK
OK
Wireless LAN
Not OK
OK*
Main uses
Projector control
Transmission of images
Function
• PC control
• PJLink
• AMX BEACON
• CRESTRON
• ALERT MAIL
• HTTP server (PROJECTOR ADJUSTMENT)
• Synchronize with an Internet time server
• Shared folder (viewer)
• Media Server (viewer)
• Network Projector
User Supportware
• Projector Management Utility
• Projection Utility
• Advanced Network Utility
* A wireless LAN unit sold separately is required to connect the projector to a wireless LAN.