beautypg.com

Ricoh PJ WU6181N 6200-Lumen WUXGA LCD Projector (No Lens) User Manual

Page 104

background image

89

5. Using On-Screen Menu

Adjusting Color Temperature [COLOR TEMPERATURE]

This option allows you to select the color temperature of your choice.
A value between 5000 K and 10500 K can be set in 100 K units.

NOTE: When [PRESENTATION] or [HIGH-BRIGHT] is selected in [REFERENCE], this function is not available.

Adjusting Brightness and Contrast [DYNAMIC CONTRAST]

When set, the most optimal contrast ratio is adjusted according to the video.

OFF ....................................Dynamic contrast is disabled.
MOTION IMAGE ........Most optimal settings for moving images.
STILL IMAGE ................Most optimal settings for static images. Rapidly follows any changes in the video.

NOTE:
• Depending on the conditions, projector settings such as [DYNAMIC CONTRAST] may not be able to be selected.

Adjusting White Balance [WHITE BALANCE]

This allows you to adjust the white balance. Contrast for each color (RGB) to adjust the white level of the screen; Brightness for
each color (RGB) is used to adjust the black level of the screen.

[COLOR CORRECTION]

Corrects the color for all signals.
Adjusts the tone for the colors red, green, blue, yellow, magenta and cyan.

RED

HUE

+ Direction

Magenta direction

− Direction

Yellow direction

SATURATION

+ Direction

Vivid

− Direction

Weak

GREEN

HUE

+ Direction

Yellow direction

− Direction

Cyan direction

SATURATION

+ Direction

Vivid

− Direction

Weak

BLUE

HUE

+ Direction

Cyan direction

− Direction

Magenta direction

SATURATION

+ Direction

Vivid

− Direction

Weak

YELLOW

HUE

+ Direction

Red direction

− Direction

Green direction

SATURATION

+ Direction

Vivid

− Direction

Weak

MAGENTA

HUE

+ Direction

Blue direction

− Direction

Red direction

SATURATION

+ Direction

Vivid

− Direction

Weak

CYAN

HUE

+ Direction

Green direction

− Direction

Blue direction

SATURATION

+ Direction

Vivid

− Direction

Weak

[CONTRAST]

Adjusts the intensity of the image according to the incoming signal.

[BRIGHTNESS]

Adjusts the brightness level or the back raster intensity.