Ricoh PJ WU6181N 6200-Lumen WUXGA LCD Projector (No Lens) - Manual (Page 120)

105
5. Using On-Screen Menu
[MULTI SCREEN]
WHITE BALANCE
This adjusts the white balance for each projector when projecting using a combination of several projectors.
This can be adjusted when [MODE] is set to [ON].
BRIGHTNESS W, BRIGHTNESS R, BRIGHTNESS G, BRIGHTNESS B
.............................................Adjusting the black color of the video.
CONTRAST W, CONTRAST R, CONTRAST G, CONTRAST B
.............................................Adjusting the white color of the video.
PICTURE SETTING
This sets the division condition when projecting using a combination of several projectors.
Please refer to “4. Multi-Screen Projection” (
→ page 61 ) for details.
MODE OFF Use the projector in a standalone state.
ZOOM This adjusts the position and width of the video area that you wish to divide. The edge blending
width will also be automatically set to that width.
TILING This assigns the divided screens to the projectors. The edge blending function will also be set
automatically.
ZOOM HORIZONTAL
ZOOM This enlarges the video area in the horizontal direction.
VERTICAL ZOOM This enlarges the video area in the vertical direction.
HORIZONTAL POSI-
TION This shifts the video area in the horizontal direction.
VERTICAL POSI-
TION This shifts the video area in the vertical direction.
TILING WIDTH This selects the number of projectors to be arranged horizontally.
HEIGHT This selects the number of projectors to be arranged vertically.
HORIZONTAL POSI-
TION This selects the position of the projector starting from the left among those arranged horizon-
tally.
VERTICAL POSI-
TION This selects the position of the projector starting from the top among those arranged vertically.