Ricoh PJ WU6181N 6200-Lumen WUXGA LCD Projector (No Lens) - Manual (Page 79)

64
4. Multi-Screen Projection
Things to note when installing projectors
• Leave sufficient space on the left and right of the projector so that the intake and exhaust vents of the projector are not ob-
structed. When the intake and exhaust vents are obstructed, the temperature inside the projector will rise and this may result
in a malfunction.
• Please do not pile up the projectors directly on top of one another when installing them. When the projectors are piled up on
top of one another, they may fall down, resulting in damage and failure.
• Installation example when using two projectors
The following installation is recommended when combining the installation of two projectors for multi-screen projection. Please
leave a space of at least 10 cm between the the intake/exhaust vent and the wall.
[Installation example]
Intake vent Exhaust vent
Cabinet Cabinet Cabinet
Air discharge Air intake
Front Right side Back
WARNING
Please request the retail store for special installation services such as when mounting the projector to the ceiling. Never carry
out the installation by yourself. The projector may fall down and result in injury. Please use a sturdy cabinet that can withstand
the weight of the projector for the installation. Please do not pile up the projectors directly on top of one another.
NOTE:
• For the range of the projection distance, please refer to the Appendix “Throw distance and screen size”. (
→ page 231 )