Ricoh PJ WU6181N 6200-Lumen WUXGA LCD Projector (No Lens) - Manual (Page 160)

145
5. Using On-Screen Menu
11. Select the [AUTHENTICATION] tab.
The [AUTHENTICATION] page will be displayed.
Select either [EAP-TLS] or [PEAP-MSCHAPv2] for [EAP TYPE]. The setting items vary depending on the EAP type.
See the table below.
EAP Type Setting Item Note
EAP-TLS User Name 1 character or more and 32 characters or less
Client Certificate PKCS#12 format file
CA Certificate
(Certificate authority’s certificate) DER format file
PEAP-MSCHAPv2 User Name 1 character or more and 32 characters or less
Password 1 character or more and 32 characters or less
CA Certificate
(Certificate authority’s certificate) DER format file
① Selecting [EAP-TLS] for [EAP TYPE]:
The following section explains the operation for selecting [EAP-TLS].
For selecting [PEAP-MSCHAPv2], go on to Step 12 on page
147 .
12. Select the [USER NAME] field and press the ENTER button.
The character entry screen (software keyboard) will be displayed. Set a user name.
• A user name must be 1 character or more and 32 characters or less.
• See page
149 for using the software keyboard to enter characters.