Ricoh PJ WU6181N 6200-Lumen WUXGA LCD Projector (No Lens) - Manual (Page 172)

157
6. Installation and Connections
Cautions when connecting an HDMI cable
• Use a certified High Speed HDMI ® Cable or High Speed HDMI ® Cable with Ethernet.
Cautions when connecting a DisplayPort cable
• Use a certified DisplayPort cable.
• Depending on the computer, some time may be required until the image is displayed.
• Some DisplayPort cables (commercially available) have locks.
• To disconnect the cable, press the button on the top of the cable’s connector, then pull the cable out.
• Power can be supplied to the connecting device from the Display Port input terminal (maximum of 1.65 W). However, power
will not be supplied to the computer.
• When signals from a device that uses a signal converter adapter are connected to the DisplayPort input connector, in some
cases the image may not be displayed.
• When the HDMI output of a computer is connected to the DisplayPort input connector, use a converter (commercially avail-
able).