Ricoh PJ WU6181N 6200-Lumen WUXGA LCD Projector (No Lens) - Manual (Page 141)

126
5. Using On-Screen Menu
Selecting Default Source [DEFAULT INPUT SELECT]
You can set the projector to default to any one of its inputs each time the projector is turned on.
LAST ..................................Sets the projector to default to the previous or last active input each time the projector is turned on.
AUTO ................................Searches for an active source in order of HDMI1
→ HDMI2 → DisplayPort → BNC → BNC(CV) → BNC(Y/C)
→ COMPUTER and displays the first found source.
HDMI1 ..............................Displays the digital source from the HDMI 1 IN connector every time the projector is turned on.
HDMI2 .............................Displays the digital source from the HDMI 2 IN connector every time the projector is turned on.
DisplayPort ...................Displays the digital source from the DisplayPort every time the projector is turned on.
BNC ...................................Project the input signal from the BNC video input terminal
BNC(CV) ..........................Project the input signal from the BNC(CV) video input terminal.
BNC(Y/C) ........................Project the input signal from the BNC(Y/C) video input terminal.
COMPUTER ...................Displays the computer signal from the COMPUTER IN connector every time the projector is turned on.
ETHERNET .....................Project the data sent from the computer via the wireless LAN unit (sold separately) that is fitted to the
main body or the Ethernet port (RJ-45).
USB-A ..............................Project the data (viewer display) of the USB memory set up in the projector.
[SEAMLESS SWITCHING]
When the input connector is switched, the image displayed before switching is held to switch to the new image without a break
due to absence of a signal.
Setting Closed Caption [CLOSED CAPTION]
This option sets several closed caption modes that allow text to be superimposed on the projected image of Video or S-Video.
The subtitles and text will be displayed a short while after the on-screen menu disappears.
OFF ....................................This exits the closed caption mode.
CAPTION 1-4 ...............Text is superimposed.
TEXT 1-4 .........................Text is displayed.
Selecting a Color or Logo for Background [BACKGROUND]
Use this feature to display a blue/black screen or logo when no signal is available. The default background is [BLUE].
NOTE:
• Even when the background logo is selected, if two pictures are displayed in [PIP/PICTURE BY PICTURE] mode, the blue background is displayed without the logo when
there is no signal.