Ricoh PJ WU6181N 6200-Lumen WUXGA LCD Projector (No Lens) - Manual (Page 112)

97
5. Using On-Screen Menu
[3D SETTINGS]
Please refer to “3-8 Projecting 3D videos” ( → page 39 ) for the operation.
STEREO VIEWER
Stack up a single or multiple projectors and carry out the settings for projecting 3D videos. Select the left / right settings of the
3D eyewear using the stereo viewer.
SINGLE Use a single projector to project 3D videos.
DUAL LEFT Use a dedicated projector for displaying videos on the left.
DUAL RIGHT Use a dedicated projector for displaying videos on the right.
STEREO FILTER
Stack up a single or multiple projectors and carry out the settings for projecting 3D videos. Image setting for 3D glasses made
by Infitec.
SINGLE Use a single projector to project 3D videos.
DUAL LEFT Use a dedicated projector for displaying videos on the left.
DUAL RIGHT Use a dedicated projector for displaying videos on the right.
FORMAT
Select the 3D video format (recording / transmission format). Select to match the 3D broadcast and 3D media. Normally, [AUTO]
is selected. Please select the 3D input signal format when the 3D detection signal of the format cannot be distinguished.
L/R INVERT
Invert the display order of the left and right videos.
Select [ON] if you feel uncomfortable with the 3D display when [OFF] is selected.