Ricoh PJ WU6181N 6200-Lumen WUXGA LCD Projector (No Lens) User Manual

Page 107

5. Using On-Screen Menu

Adjusting Horizontal/Vertical Position [HORIZONTAL/VERTICAL]

Adjusts the image location horizontally and vertically.

• An image can be distorted during the adjustment of [CLOCK] and [PHASE]. This is not malfunction.
• The adjustments for [CLOCK], [PHASE], [HORIZONTAL], and [VERTICAL] will be stored in memory for the current signal. The

next time you project the signal with the same resolution, horizontal and vertical frequency, its adjustments will be called
up and applied.

To delete adjustments stored in memory, from the menu, you select [RESET]

→

[CURRENT SIGNAL] and reset the adjust-

ments.

[BLANKING]

Adjusts the display range (blanking) at the top, bottom, left and right edges of the input signal.

Selecting Overscan Percentage [OVERSCAN]

Select overscan percentage (Auto, 0%, 5% and 10%) for signal.

Projected image

Overscaned by 10%

NOTE:
• The [OVERSCAN] item is not available:
- when [NATIVE] is selected for [ASPECT RATIO].