Ricoh PJ WU6181N 6200-Lumen WUXGA LCD Projector (No Lens) - Manual (Page 100)

85
5. Using On-Screen Menu
Entering the currently projected signal into the Entry List [STORE]
1. Press the ▲ or ▼ button to select any number.
2. Press the ◀ or ▶ button to select [STORE] and press the ENTER button.
Calling up a signal from the Entry List [LOAD]
Press the ▲ or ▼ button to select a signal and press the ENTER button.
Editing a signal from the Entry List [EDIT]
1. Press the ▲ or ▼ button to select a signal you wish to edit.
2. Press the ◀ , ▶ , ▲ , or ▼ button to select [EDIT] and press the ENTER button.
The Edit window will be displayed.
SOURCE NAME Enter a signal name. Up to 18 alphanumeric characters can be used.
INPUT The input terminal can be changed. The input terminal may be switched to HDMI1/HDMI2/Display Port/
BNC/BNC(CV)/BNC(Y/C)/COMPUTER/ETHERNET.
LOCK Set so that the selected signal cannot be deleted when [ALL DELETE] is executed. The changes made
after LOCK execution cannot be saved.
SKIP Set so that the selected signal will be skipped during auto search.
3. Set the above items and select [OK] and press the ENTER button.
NOTE: The input terminal cannot be changed to the currently projected signal.