Ricoh PJ WU6181N 6200-Lumen WUXGA LCD Projector (No Lens) - Manual (Page 165)

150
5. Using On-Screen Menu
WPS(MM)
When the wireless LAN access point connected to the projector supports WPS (Wi-Fi Protected Setup™), you can use PIN method
or push button method to set up the wireless LAN for the projector.
PIN TYPE Set a 4-digit or 8 digit-PIN code of WPS for your access point to complete setting for the SSID security.
PUSH BUTTON TYPE Press the dedicated button of the access point and the projector’s wireless LAN unit to complete
setting for the SSID security.
NETWORK INFORMATION
The following information will be displayed when the projector is connected to a network (wired LAN or wireless LAN).
PROJECTOR NAME
HOST NAME
NETWORK INFORMA-
TION (WIRED LAN/WIRE-
LESS LAN) CONNECTION STATUS, IP ADDRESS, SUBNET MASK, GATEWAY, WINS, DNS, MAC ADDRESS, SSID,
NETWORK TYPE, WEP/WPA, CHANNEL, SIGNAL LEVEL, AUTHENTICATION, AUTHENTICATION
PERIOD
DISPLAY THE INFORMA-
TION IN APPLICATION
MENU Turn on or off the display of the network information.
The meanings of these status statements are described below.
Statement Authentication status
Authenticated Authentication is done correctly.
Failure Authentication failed.
Authenticating… Authentication is in process.
Expired The digital certificate is expired. Or [DATE, TIME PRESET] is not set correctly.
Time Error The [DATE, TIME PRESET] has been cleared. Set the correct date and time.