beautypg.com

Connecting an external monitor – Ricoh PJ WU6181N 6200-Lumen WUXGA LCD Projector (No Lens) User Manual

Page 174

background image

159

6. Installation and Connections

HDM I IN AUDIO IN

HDM I OUT

AUDIO OUT

Connecting an External Monitor

You can connect a separate, external monitor to your projector to simultaneously view on a monitor the computer analog image
you’re projecting.
• Please refer to Page

65

when displaying the [PIP/PICTURE BY PICTURE] screen.

NOTE:
• When outputting HDMI signals, turn on the power of the video device on the output side and keep it connected before inputting video signals into this device. The

HDMI output terminals of the projector are equipped with repeater functions. When a device is connected to the HDMI output terminal, the resolution of the output
signal is limited by the resolution supported by the connected device.

• Connecting and disconnecting an HDMI cable or selecting another input source on the second and subsequent projectors will disable the HDMI repeater function.
• In the case of the HDMI output terminal of the projector, the theoretical number of units that can be connected in a series is seven. The maximum number of units

that can be connected may be reduced by the external environment and quality of the signal and cable, etc. The number of units that can be connected may differ
depending on the HDCP version, restriction on the number of HDCP repeaters in the source device and the quality of the cable. The overall system needs to be checked
in advance when building a system.

• When audio equipment is connected, the projector speaker is disabled.
• To output audio from the audio output terminal when the input terminal is neither “COMPUTER IN” nor “BNC IN”, select [BNC] under [AUDIO SELECT] of the on-screen

menu.

• When the [STANDBY MODE] is set to [NORMAL], video and audio will not be output when the projector is set to the standby mode. Set the standby mode to [NETWORK

STANDBY] .

• Both the composite video signal from each input connector as the computer, BNC, and BNC (CV), and the S-video signal from the BNC (Y/C) Input connector are not

output from HDMI OUT Connector of this projector.

Computer cable (VGA)
(not supplied)

Stereo mini-plug audio cable (not
supplied)

HDMI cable (not supplied)