Ricoh PJ WU6181N 6200-Lumen WUXGA LCD Projector (No Lens) - Manual (Page 139)

124
5. Using On-Screen Menu
NETWORK SERVICE
HTTP SERVER Set a password for your HTTP server. Up to 10 alphanumeric
characters
PJLink This option allows you to set a password when you use the PJLink feature.
NOTE:
• Do not forget your password. However, if you forget your password, consult with your dealer.
• What is PJLink?
PJLink is a standardization of protocol used for controlling projectors of different manufac-
turers. This standard protocol is established by Japan Business Machine and Information
System Industries Association (JBMIA) in 2005.
The projector supports all the commands of PJLink Class 1.
• Setting of PJLink will not be affected even when [RESET] is done from the menu.
Up to 32 alphanumeric
characters
AMX BEACON Turn on or off for detection from AMX Device Discovery when connecting
to the network supported by AMX’s NetLinx control system.
TIP:
When using a device that supports AMX Device Discovery, all AMX NetLinx control system
will recognize the device and download the appropriate Device Discovery Module from an
AMX server.
Placing a checkmark will enable detecting the projector from AMX
Device Discovery.
Clearing a checkmark will disable detecting the projector from AMX
Device Discovery.
—
CRESTRON ROOMVIEW: Turn on or off when controlling the projector from your PC.
CRESTRON CONTROL: Turn on or off when controlling the projector
from your controller.
• CONTROLLER IP ADDRESS: Enter your IP address of CRESTRON
SERVER.
• IP ID: Enter your IP ID of CRESTRON SERVER.
Up to 12 numeric char-
acters