Ricoh PJ WU6181N 6200-Lumen WUXGA LCD Projector (No Lens) User Manual
Page 65
50
3. Convenient Features
SITE SURVEY
Displays a list of available SSIDs for wireless LAN on site. Select an SSID which you can access.
NETWORK TYPE
Select communication method when using wireless LAN.
INFRASTRUCTURE: Select this option when communicating with one or more equipment con-
nected to the wireless LAN network via a wireless access point.
AD HOC: Select this option when using the wireless LAN to directly communicate with a com-
puter in peer-to-peer mode.
SECURITY TYPE
Turn on or off the encryption mode for secure transmission. When turn on the encryption mode,
set WEP key or encrypted key.
DISABLE
Will not turn on the encryption feature. Your communications may be
monitored by someone.
WEP 64 bit
Uses 64-bit datalength for secure transmission.
WEP 128 bit
Uses 128-bit datalength for secure transmission. This option will increase
privacy and security when compared to use of 64-bit datalength encryption.
WPA-PSK TKIP / WPA-PSK AES/
WPA2-PSK TKIP / WPA2-PSK AES/
WPA-EAP TKIP EAP-TLS/
WPA-EAP AES EAP-TLS/
WPA-EAP TKIP PEAP-MSCHAP v2/
WPA-EAP AES PEAP-MSCHAP v2/
WPA2-EAP TKIP EAP-TLS/
WPA2-EAP AES EAP-TLS/
WPA2-EAP TKIP PEAP-MSCHAP v2/
WPA2-EAP AES PEAP-MSCHAP v2
These options parovide stronger security
than WEP.
NOTE:
• The WEP settings must be the same as communication devices such as PC or access point in your wireless network.
• When you use WEP, your image transmission speed will slow down.
• Other encryption keys than WEP 64bit and WEP 128bit are not available when [AD HOC] is selected from [NETWORK TYPE].
• To install a digital certificate, use the projector’s menu. (
→
INDEX
Select encryption key when selecting [WEP 64 bit] or [WEP 128 bit] in [SECURITY TYPE].
KEY
When selecting [WEP 64 bit] or [WEP 128 bit] in [SECURITY TYPE]:
Enter WEP key.
Select
Characters (ASCII)
Hexadecimal digit (HEX)
WEP 64 bit
Up to 5 characters
Up to 10 characters
WEP 128 bit
Up to 13 characters
Up to 26 characters
When selecting [WPA PSK-TKIP], [WPA PSK-AES], [WPA2 PSK-TKIP] or [WPA2 PSK-AES]:
Enter encryption key. Key length must be 8 or greater and 63 or less.
USERNAME
Set a user name for WPA-EAP/WPA2-EAP.
PASSWORD
Set a password for WPA-EAP TKIP PEAP-MSCHAP v2/WPA-EAP AES PEAP-MSCHAP v2/WPA2-
EAP TKIP PEAP-MSCHAP v2/WPA2-EAP AES PEAP-MSCHAP v2.
USE DIGITAL CERTIFICATE
Select this if you use a digital certificate for WPA-EAP TKIP PEAP-MSCHAP v2/WPA-EAP AES
PEAP-MSCHAP v2/WPA2-EAP TKIP PEAP-MSCHAP v2/WPA2-EAP AES PEAP-MSCHAP v2.
• NAME
HOST NAME
Enter the hostname of the network connected to the projector. A host name must be 15 or less.