Changing or updating network connections – Epson SureColor P8570DL 44" Wide-Format Dual Roll Printer with High-Capacity 1.6L Ink Pack System User Manual

Page 60

Network Environment Messages

Message

Solution

The Wi-Fi environment needs to be
improved. Turn the wireless router off and
then turn it on. If the connection does not
improve, see the documentation for the
wireless router.

Move your product closer to your router or access point,
and remove any obstacles between them. Then turn off
your router or access point, wait about 10 seconds, and
turn it back on again. If you still cannot connect to your
product, check the documentation that came with your
router or access point for solutions.

*No more devices can be connected.
Disconnect one of the connected devices if
you want to add another one.

You can connect up to 4 computers or other devices to
your product using a Wi-Fi Direct (Simple AP) connection.
If you want to add another device, disconnect an existing
connected device first.

The same SSID as Wi-Fi Direct exists in
the environment. Change the Wi-Fi Direct
SSID if you cannot connect a smart device
to the printer.

Change the Wi-Fi Direct SSID.

Parent topic:

Printing a Network Connection Report

Changing or Updating Network Connections

See these sections to change or update how your product connects to a network.

Note:

See the online

Administrator's Guide

for detailed information.

Accessing the Web Config Utility
Changing a USB Connection to a Wi-Fi Connection
Changing a Wi-Fi Connection to a Wired Network Connection
Connecting to a New Wi-Fi Router
Disabling Wi-Fi Features

Parent topic:

Wi-Fi or Wired Networking