Printing cad drawings in hp-gl/2 or hp rtl mode – Epson SureColor P8570DL 44" Wide-Format Dual Roll Printer with High-Capacity 1.6L Ink Pack System User Manual
Page 218
218
•
SureColor T3770D/T3770DE/T3770E/T5770D/T5770DM/T7770D/T7770DL/T7770DM
: For Print
Quality, select
Select Target
, and then select
CAD/Line Drawing - Black
,
CAD/Line Drawing -
Color
, or
CAD/Line Drawing - Bi-Level
.
Note:
Available settings depend on the selected media type.
Note:
For Mac users, display the Print screen and select
Printer Options
>
Printer Settings
.
Then select
Line Drawing
for the Print Quality setting.
9. Select any other printing settings as necessary.
10. Click
OK
, then click
.
11. Start printing your drawing from the CAD software.
Parent topic:
Printing CAD Drawings in HP-GL/2 or HP RTL Mode
You can change settings in your product's control panel to print CAD drawings using HP-GL/2
(compatible with the HP Designjet 750C) or HP RTL mode. This printing method is best for maps and
blueprints, or when lines need to be emphasized.
Note:
The product emulates HP-GL/2 or HP RTL commands, however, not all HP-GL/2 and HP RTL
features are supported on the product. If you intend to use an untested application, we recommend that
you test its output in advance. For a list of applications that have been pre-tested, visit Epson's support
site.
1. On the LCD screen, select
>
General Settings
>
Printer Settings
>
Universal Print Settings
.