Epson SureColor P8570DL 44" Wide-Format Dual Roll Printer with High-Capacity 1.6L Ink Pack System - Manual (Page 128)

128
Setting Description
PS unit print settings
(not available on SureColor
P6570DE/P6570E/T3770DE/T3770E)
Select the print settings to use when printing using
the Adobe Embedded Print Engine
If you are printing using the PS Folder, set the Ink
Density (the ink density set in the PS printer driver
is applied otherwise).
For the ICC profile , select Use the same profile
as the printer driver to use the RGB Profile
(make sure to set the RGB Profile in advance) or
Set the profile for PS unit to use the CMYK
Profile.
Roll Core Diameter Select the paper core size for the loaded roll paper
Paper Feed Offset Select the amount of offset necessary to reduce
banding on uneven color in printouts
Paper Size Check Select On to automatically detect the paper width
when paper is loaded.
Select Off when the paper roll is empty. This
allows you to set the paper width before feeding
the paper.
Margins Select the margin for the leading edge of the
printed image. Depending on the paper type and
printing environment, colors may be uneven near
the leading edge if the margin is small.
Parent topic: Creating Custom Paper Settings Using Epson Media Installer
Downloading Epson Media Settings
You can download new or updated media settings for Epson media using the Epson Media Installer
utility.
Note: To install media settings on the printer, you must be connected to the printer.
Note: On Mac, Epson Media Installer requires OS X 10.9.x or later to be installed.