Epson SureColor P8570DL 44" Wide-Format Dual Roll Printer with High-Capacity 1.6L Ink Pack System User Manual
Page 361
361
• Make sure no direct sunlight enters the printer, or the alignment pattern may not be read correctly.
Aligning the Print Head Automatically Using the Product Control Panel
Aligning the Print Head Manually Using the Product Control Panel
Parent topic:
Related concepts
Aligning the Print Head Automatically Using the Product Control Panel
You can automatically align the print head using the control panel on your product. Make sure no direct
sunlight enters the printer, or the alignment pattern may not be read correctly.
Note:
You must manually align the print head when you are using any transparent or colored paper or on
these paper types: Plain paper, Epson Enhanced Matte Poster Board.
1. Load roll paper or cut sheet paper in the printer.
Note:
Load paper that is at least 15.2 × 21.9 inches (388 × 558 mm) or larger.
2. Make sure the correct paper type is selected.
Note:
If you are using commercially available paper, make sure you create the custom paper
settings in advance.
3. Select
> paper source >
Paper Setting
>
Print Adjustments
>
Ruled Line Alignment
from the
product control panel.
4. Select one of the following:
•
Auto (Standard)
: if printed ruled lines are misaligned or print results are grainy or otherwise
unsatisfactory (takes 9 to 35 minutes to complete)
•
Auto (Details)
: if printed ruled lines are misaligned at the edge of the paper or standard automatic
alignment results are unsatisfactory (takes 9 to 35 minutes to complete)
The sensor reads the adjustment pattern and automatically aligns the print head.
Note:
Do not open the front cover or turn off the printer during the alignment process.
5. After the alignment is complete, check the results.