Epson SureColor P8570DL 44" Wide-Format Dual Roll Printer with High-Capacity 1.6L Ink Pack System User Manual
Page 300
300
Setting
Options
Description
Roll Paper Setup
Cut Settings
Auto Cut
Automatically cuts the roll paper after printing
Print Cutting Guideline
Select
On
to print cut lines on roll paper (if
Auto Cut
is turned off)
Wait for Cut Between
Pages
Select
On
to pause before cutting pages after
printing
Cut for Borderless Print
Select
Two Cuts
to insert a margin and cut
twice between pages, or
One Cut
to cut once
between pages
Quick Cut
Select
On
to cut once between pages while
the next page is still printing
Cut Mode
Select
Quiet
to reduce the speed and noise
when cutting paper
Margin Refresh
Select
On
to automatically remove ink stains
from a previous borderless print by trimming
the leading edge of the paper
Roll End Option
Selects the action when roll paper runs out
and you load more paper
Continue
: Prints the remaining data
Stop Printing
: Does not print the remaining
data
Reprint
: Restarts the print job from the
beginning; available only if the SSD unit is
installed
Take-up After Cut
(not available on
SureColor
P6570E/T3770E)
Select
On
to store the print on the Auto Take-
up Reel (if installed) after cutting it off the roll
Error Notice
Paper Size Notice
Paper Type Notice
Detect Paper Skew
Select
On
to display an error message when
the output size or paper type settings differ
between the driver and printer, or if the paper
is skewed