Roland SPD-SX PRO Sampling Pad with 32GB Internal Memory - Manual (Page 9)

Introduction
9
Rear Panel (Connecting Your Equipment)
1. DC IN jack
Connect the included AC adaptor to this jack.
Cord hook
To prevent the inadvertent disruption of power to your unit (should the plug be pulled out accidentally), and to avoid
applying undue stress to the jack, anchor the power cord using the cord hook, as shown in the illustration.
2. [POWER] switch
Turns the power on/off.
3. USB port
USB MEMORY port
Connect a USB flash drive (commercially available) to load audio data or save the settings.
Use a commercially available USB flash drive. Note that not all commercially available USB flash drives are guaranteed to
work.
USB COMPUTER port
Connect your computer to this port with a USB cable.
4. MIDI connectors
Connect devices that support MIDI input/output to exchange MIDI messages or synchronize the tempo.
5. FOOT SW 1/2 jack
Connect a footswitch (FS-5U, FS-6 or FS-7; sold separately) to trigger the sounds and control other parameters.