Roland SPD-SX PRO Sampling Pad with 32GB Internal Memory - Manual (Page 62)

Customizing a kit (KIT EDIT 1)
62
Configuring How the Pad Indicators Light Up (PAD LED)
1. Select [MENU] Ó “KIT EDIT1”.
2. Use the cursor [ а ] [ б ] [ г ] [ в ] buttons to select “PAD LED” and press the [ENTER] button.
Use the function buttons to select the parameters.
Button Explanation
[F1] (PAD)
Shows the settings screen for the pad indicators.
[F2] (VERTICAL)
Shows the settings screen for the vertical indicators that separate each pad on the left and right.
[F6]
(BRIGHTNESS)
Shows the window to set the brightness of the pad’s indicator and the vertical indicators that separate each
pad on the left and right.
This setting is common to all kits.
Active Pad Brightness Adjusts the maximum brightness of the indicators when you strike the pad.
Inactive Pad Brightness
Adjusts the usual brightness of the pad’s indicator (how bright the indicator
is when the pad is not being struck).
Vertical Brightness Adjusts the brightness of the vertical indicators.
[F4] (COLOR LIST)
Switches to the SYSTEM LED - COLOR LIST screen.
Adjusting the Pad LED Brightness and Colors (SYSTEM LED) (P.121)
[F6] (EXIT) Closes the window.
Controller Explanation
Cursor [ а ] [ б ] [ г ] [ в ] button Selects the pads.
[-] [+] buttons Sets the color.
Parameter Value Explanation
[F1] (PAD): top row of each pad RED, GREEN, BLUE, Sets the illumination color for each pad.