Roland SPD-SX PRO Sampling Pad with 32GB Internal Memory - Manual (Page 35)

Playing
35
Connecting an FS-5U
1. Connect the external pad to the TRIGGER IN jack.
Connect the footswitch to the FOOT SW jack.
2. Select [MENU] Ó SYSTEM Ó PAD/TRIG IN.
You don’t need to make the TRIGGER IN setting for the footswitch connected to the FOOT SW jack. Skip to step 4.
When connecting two external pads to a single TRIGGER IN jack, set the “Input Mode” to “TRIG x 2”.
3. Select the trigger type corresponding to the external pad that you’ve connected.
Select the trigger type that matches the model name of the external pad you’ve connected.
Set the parameters as necessary.
Ø Configuring the Pads and the TRIGGER IN Jacks (PAD /TRIGGER IN) (P.100)
4. Select the kit that you want to play.
Ø Selecting a Kit ([+] [-] buttons, [VALUE] knob) (P.26)
5. Select [MENU] Ó [F1] (KIT EDIT1) Ó PAD EDIT.
6. Strike the external pad to make the PAD EDIT - LAYER EDIT screen for the external pad appear.
Press the footswitch to configure its settings.