Multi mode filter – Roland SPD-SX PRO Sampling Pad with 32GB Internal Memory User Manual
Page 164
Effect List
164
Parameter
Value
Explanation
Tempo Sync
OFF, ON
If this is ON, the rate synchronizes with the tempo of the rhythm.
(P.30)
Rate (Hz)
0.05–10.00 [Hz]
Frequency of modulation
Rate (note)
Note
(P.197)
Depth
0–127
Depth of modulation
Attack
0–127
Speed at which the cutoff frequency will change
This is effective if Modulation Wave is SQR, SAW1, or SAW2.
Level
0–127
Output Level
*1: This parameter corresponds to MFX Ctrl. For details, refer to “
Controlling the MFX with the PAD EDIT [1] [2] Knobs (MFX
(P.198)”.
*1: This parameter corresponds to MASTER EFFECT CTRL. For details, refer to “
Controlling the MASTER EFFECT with the MASTER
EFFECT Knob (MASTER EFFECT CTRL)
(P.199)”.
Multi Mode Filter
This is a filter that is adjusted for effective use in a DJ performance.
Parameter
Value
Explanation
Filter Type
LPF/HPF, LPF, HPF,
BPF
Type of filter
LPF/HPF: The filter type is automatically switched according to the Filter Tone parameter
value.
Filter Tone
(*1)
0–255
Frequency at which the filter operates
Filter Color
0–255
Filter resonance level
Higher values more strongly emphasize the region of the operating frequency.
Filter Slope
-12, -24, -36 [dB]
Amount of attenuation per octave
-12 dB: gentle
-24 dB: steep
-36 dB: extremely steep
Filter Gain
0–+12 [dB]
Amount of boost for the filter output
Level
0–127
Output Level
*1: This parameter corresponds to MFX Ctrl. For details, refer to “
Controlling the MFX with the PAD EDIT [1] [2] Knobs (MFX
(P.198)”.
*1: This parameter corresponds to MASTER EFFECT CTRL. For details, refer to “
Controlling the MASTER EFFECT with the MASTER
EFFECT Knob (MASTER EFFECT CTRL)
(P.199)”.