Chorus – Roland SPD-SX PRO Sampling Pad with 32GB Internal Memory User Manual
Page 178
Effect List
178
Chorus
This is a stereo chorus. A filter is provided so that you can adjust the timbre of the chorus sound.
Parameter
Value
Explanation
Filter Type
OFF, LPF, HPF
Type of filter
OFF: No filter is used.
LPF: Cuts the frequency range above the Cutoff Freq
HPF: Cuts the frequency range below the Cutoff Freq
Cutoff Freq
200, 250, 315, 400, 500, 630, 800, 1000, 1250, 1600, 2000,
2500, 3150, 4000, 5000, 6300, 8000 [Hz]
Basic frequency of the filter
Pre Delay
0.0–100 [msec]
Adjusts the delay time from the direct sound until the
chorus sound is heard.
Tempo Sync
OFF, ON
If this is ON, the rate synchronizes with the tempo of
the rhythm.
(P.30)
Rate (Hz)
0.05–10.00 [Hz]
Frequency of modulation
Rate (note)
Note
(P.197)
Depth (*1)
0–127
Depth of modulation
Phase
0–180 [deg]
Spatial spread of the sound
Low Gain
-15–+15 [dB]
Gain of the low range
High Gain
-15–+15 [dB]
Gain of the high range
Balance
D100:0W–D0:100W
Volume balance between the direct sound (D) and the
chorus sound (W)
Level
0–127
Output Level
*1: This parameter corresponds to MFX Ctrl. For details, refer to “
Controlling the MFX with the PAD EDIT [1] [2] Knobs (MFX
(P.198)”.
*1: This parameter corresponds to MASTER EFFECT CTRL. For details, refer to “
Controlling the MASTER EFFECT with the MASTER
EFFECT Knob (MASTER EFFECT CTRL)
(P.199)”.