Step phaser – Roland SPD-SX PRO Sampling Pad with 32GB Internal Memory User Manual
Page 170
Effect List
170
*1: This parameter corresponds to MASTER EFFECT CTRL. For details, refer to “
Controlling the MASTER EFFECT with the MASTER
EFFECT Knob (MASTER EFFECT CTRL)
(P.199)”.
Step Phaser
This is a stereo phaser. The phaser effect will be varied gradually.
Parameter
Value
Explanation
Mode
4-STAGE, 8-STAGE, 12-
STAGE
Number of stages in the phaser
Manual
0–127
Center frequency at which the sound is modulated
Tempo Sync (Rate)
OFF, ON
If this is ON, the rate synchronizes with the tempo of the rhythm.
(P.30)
Rate (Hz)
0.05–10.00 [Hz]
Modulation rate
Rate (note)
Note
(P.197)
Depth (*1)
0–127
Depth of modulation
Polarity
INVERSE, SYNCHRO
Selects whether the left and right phase of the modulation will be the same or the
opposite.
INVERSE: The left and right phase will be opposite.
When using a mono source, this spreads the sound.
SYNCHRO: The left and right phase will be the same.
Select this when inputting a stereo source.
Resonance
0–127
Amount of feedback
Cross Feedback
-98–+98 [%]
Adjusts the proportion of the phaser sound that is fed back into the effect.
Negative (-) settings will invert the phase.
Tempo Sync (Step
Rate)
OFF, ON
If this is ON, the rate synchronizes with the tempo of the rhythm.
(P.30)
Step Rate (Hz)
0.10–20.00 [Hz]
Rate of the step-wise change in the phaser effect
Step Rate (note)
Note
(P.197)
Mix
0–127
Level of the phase-shifted sound
Low Gain
-15–+15 [dB]
Gain of the low range
High Gain
-15–+15 [dB]
Gain of the high range
Level
0–127
Output Level
*1: This parameter corresponds to MFX Ctrl. For details, refer to “
Controlling the MFX with the PAD EDIT [1] [2] Knobs (MFX
(P.198)”.
*1: This parameter corresponds to MASTER EFFECT CTRL. For details, refer to “
Controlling the MASTER EFFECT with the MASTER
EFFECT Knob (MASTER EFFECT CTRL)
(P.199)”.