Chorus effects, Flanger, P.175) – Roland SPD-SX PRO Sampling Pad with 32GB Internal Memory User Manual
Page 175: P.176), P.177), P .178), P.179), P .180), P.180) flanger
Effect List
175
Chorus effects
(P.175)
(P.176)
(P.177)
(P.178)
(P.179)
(P.179)
(P.180)
(P.180)
Flanger
This is a stereo flanger (The LFO has the same phase for left and right.).
It produces a metallic resonance that rises and falls like a jet airplane taking off or landing.
A filter is provided so that you can adjust the timbre of the flanged sound.
Parameter
Value
Explanation
Filter Type
OFF, LPF, HPF
Type of filter
OFF: No filter is used.
LPF: Cuts the frequency range above the Cutoff Freq
HPF: Cuts the frequency range below the Cutoff Freq
Cutoff Freq
200, 250, 315, 400, 500, 630, 800, 1000, 1250,
1600, 2000, 2500, 3150, 4000, 5000, 6300, 8000
[Hz]
Basic frequency of the filter
Pre Delay
0.0–100 [msec]
Adjusts the delay time from the direct sound until the flanger
sound is heard.
Tempo Sync
OFF, ON
If this is ON, the rate synchronizes with the tempo of the
rhythm.
(P.30)
Rate (Hz)
0.05–10.00 [Hz]
Frequency of modulation
Rate (note)
Note
(P.197)
Depth (*1)
0–127
Depth of modulation
Phase
0–180 [deg]
Spatial spread of the sound
Feedback
-98–+98 [%]
Adjusts the proportion of the flanger sound that is fed back
into the effect. Negative (-) settings will invert the phase.
Low Gain
-15–+15 [dB]
Gain of the low range
High Gain
-15–+15 [dB]
Gain of the high range
Balance
D100:0W–D0:100W
Volume balance between the direct sound (D) and the
flanger sound (W)
Level
0–127
Output Level