Roland SPD-SX PRO Sampling Pad with 32GB Internal Memory - Manual (Page 156)

Effect List
156
Reverse Delay
This is a reverse delay that adds a reversed and delayed sound to the input sound.
A tap delay is connected immediately after the reverse delay.
Parameter Value Explanation
Threshold 0–127 Volume at which the reverse delay will begin to be applied
Tempo Sync Rev
OFF, ON If this is ON, the rate synchronizes with the tempo of the
rhythm.
Ø KIT TEMPO (P.30)
Rev Delay Time (msec) 1–1300 [msec] Delay time from when sound is input into the reverse delay
until the delay sound is heard
Rev Delay Time (note)
Note
Ø Note (P.197)
Rev Delay Feedback
-98–+98 [%] Proportion of the delay sound that is to be returned to the
input of the reverse delay (negative (-) values invert the
phase)
Rev Delay HF Damp
200, 250, 315, 400, 500, 630, 800, 1000,
1250, 1600, 2000, 2500, 3150, 4000, 5000,
6300, 8000, BYPASS [Hz]
Frequency at which the high-frequency content of the
reverse-delay sound will be cut (BYPASS: no cut)
Rev Delay Pan L64–63R Panning of the reverse delay sound
Rev Delay Level 0–127 Volume of the reverse delay sound
Tempo Sync Delay1
OFF, ON If this is ON, the rate synchronizes with the tempo of the
rhythm.
Ø KIT TEMPO (P.30)
Delay1 Time (msec) 1–1300 [msec] Delay time from when sound is input into the tap delay
until the delay sound is heard
Delay1 Time (note)
Note
Ø Note (P.197)
Tempo Sync Delay2
OFF, ON If this is ON, the rate synchronizes with the tempo of the
rhythm.
Ø KIT TEMPO (P.30)
Delay2 Time (msec) 1–1300 [msec] Delay time from when sound is input into the tap delay
until the delay sound is heard
Delay2 Time (note)
Note
Ø Note (P.197)
Tempo Sync Delay3
OFF, ON If this is ON, the rate synchronizes with the tempo of the
rhythm.
Ø KIT TEMPO (P.30)
Delay3 Time (msec) 1–1300 [msec] Delay time from when sound is input into the tap delay
until the delay sound is heard
Delay3 Time (note)
Note
Ø Note (P.197)
Delay 3 Feedback
-98–+98 [%] Proportion of the delay sound that is to be returned to the
input of the tap delay (negative (-) values invert the phase)
Delay HF Damp
200, 250, 315, 400, 500, 630, 800, 1000,
1250, 1600, 2000, 2500, 3150, 4000, 5000,
6300, 8000, BYPASS [Hz]
Frequency at which the hi-frequency content of the tap
delay sound will be cut (BYPASS: no cut)
Delay 1 Pan L64–63R Panning of the tap delay sounds
Delay 2 Pan L64–63R
Delay 1 Level 0–127 Volume of the tap delay sounds
Delay 2 Level 0–127
Low Gain -15–+15 [dB] Gain of the low range