Roland SPD-SX PRO Sampling Pad with 32GB Internal Memory - Manual (Page 49)

Customizing a kit (KIT EDIT 1)
49
MFX Settings (MFX1–4)
MFX1–4
Parameter Value Explanation
Type Ø Effect List (P.151) Sets the effect type.
(Output destination)
MASTER+PHONES, PHONES-ONLY,
SIDE CHAIN
Selects the output (connection) destination
for MFX 1–4.
Level -INF–+6.0 dB Sets the effect level.
(MFX parameters) Ø Effect List (P.151) Ø Effect List (P.151)
Area of pad shown in illustration
(bottom right)
- The selected pad is shown with a blue border.
Also, the assigned MFX is shown.
Button Explanation
[F1] (MFX 1) Displays the MFX 1 settings screen.
[F2] (MFX 2) Displays the MFX 2 settings screen.
[F3] (MFX 3) Displays the MFX 3 settings screen.
[F4] (MFX 4) Displays the MFX 4 settings screen.
[F5] (ON/OFF) Switches the selected MFX on/off.
[F6] (ASSIGN) Shows the settings screen for the pad and trigger output destinations.
SIDE CHAIN Settings
You can apply a side chain compressor to the sound.
Let’s assume that the kick drum and backing tracks are assigned to different pads.
By applying a side chain compressor that works in tandem with the kick drum volume, the kick drum stands out in the mix,
without getting buried by the backing tracks.
In this situation, make the following settings.