Roland SPD-SX PRO Sampling Pad with 32GB Internal Memory User Manual
Page 75
Configuring the Overall Kit (KIT EDIT2)
75
Configuring the PAD EDIT Knobs and the EXPRESSION Pedal (PAD EDIT KNOB/EXP
PEDAL)
1.
Select [MENU]
Ó
“KIT EDIT2”.
2.
Use the cursor [
а
] [
б
] [
г
] [
в
] buttons to select “PAD EDIT KNOB/EXP PEDAL” and press the [ENTER]
button.
Use the function buttons to select the parameters.
Button
Explanation
[F1] (PAD EDIT KNOB) Configures the PAD EDIT [1] [2] knobs.
[F2] (EXP PEDAL)
Configures the expression pedal that’s connected.
[F6] (SYSTEM)
Configures the PAD EDIT KNOB/EXP PEDAL settings in SYSTEM.
This can only be configured when “Pad Edit Knob Setting” or “Exp Pedal Setting” is set to “SYSTEM”.
Configuring the PAD EDIT [1] [2] knobs (PAD EDIT KNOB)
Use the cursor [
а
] [
б
] [
г
] [
в
] buttons to select “Pad Edit Knob Setting”, and the [-] [+] buttons to select “KIT” or “SYSTEM”.
The [F1] PAD EDIT KNOB settings are enabled only when “KIT” is selected.
When this is set to “SYSTEM”, you can change the PAD EDIT KNOB settings for the
SPD-SX PRO
overall by pressing [F6].
Parameter
Value
Explanation
Assign Template
MFX1-2 CTRL, MFX3-
4 CTRL,
PAD EDIT KNOB CC
Selects the assignment for the knobs.
*
When you edit this parameter, all assigned parameters for the PAD EDIT
knobs change to their optimal settings. You can then adjust each parameter
as necessary.
Group
MFX1–4, SIDE CHAIN,
SYSTEM LED,
MASTER EFFECT,
PAD EDIT KNOB CC
Sets the groups that are assigned to the knobs.
The parameters that you can configure differ depending on the group.
Param
When “Group” is “MFX 1–
4”
Value
Explanation
MFX Switch Switches each MFX on/off for the currently selected kit.
MFX Type Switches each MFX type for the currently selected kit.
MFX Ctrl
Controls each MFX for the currently selected kit.
The MFX parameters that can be controlled using the PAD
EDIT knobs are preset.
For details, refer to the parameters for each effect as listed in
“
(P.151)”.
The controllable value range for all parameters is from 0 to
127.
(The parameter view on the KIT MFX screen is not refreshed
even if you turn the PAD EDIT knobs.)