Roland SPD-SX PRO Sampling Pad with 32GB Internal Memory - Manual (Page 6)

Introduction
6
Effect/output routing
Kit effects
The SPD-SX PRO includes MFX 1–4 and a side chain effect, which can be configured individually for each kit.
The kit effect is applied to the sounds generated by PAD 1–9, TRIG IN 1–8 and FOOT SW 1, 2.
MFX Settings (MFX1–4) (P.49)
SIDE CHAIN Settings (P.49)
You can use the PAD EDIT [1] and [2] knobs to control the MFX 1–4 effects and switch the side chain effect in real time.
Configuring the PAD EDIT [1] [2] knobs (PAD EDIT KNOB) (P.75)
Overall system effects
The SPD-SX PRO features a master effect, master comp and master EQ.
These effects are only applied to the sound that’s output from the MASTER OUT jacks and PHONES jack.
You can use the [MASTER EFFECT] knob to control the master effects in real time.
MASTER EFFECT Settings (P.51)
The master effect, master comp and master EQ settings can’t be stored individually for each kit.
Output routing settings
You can output the PAD and MFX audio to an output that you choose.
These settings can be made individually for each kit.
Setting the Output Destination (OUTPUT ASSIGN) (P.53)