Magnum Energy ME-RTR Router - Manual (Page 60)

©
2014 Magnum Energy, Inc. Page 52
Menu Maps
Menu Button
Default/
Current
Setting
Press SELECT
Knob
Rotate
SELECT
Knob
LEGEND
SETUP
02A Search Watts
Sensitivity =
5 Watts
ALL View INV SETUP
Menu Headings
Menu
Port Display Type
R
Set Search Watts
Sensitivity =
5 Watts
ALL edit INV SETUP
P
Device
Setting
Settings/Range
Figure 4-6, Legend Key for Menu Maps
Screen defi nitions:
Device – Displays the device being monitored or adjusted. Such as: Inverter (INV), Automatic
Generator Start (AGS), Battery Monitor (BMK), Remote Control (RC), AC Load Diversion (ACLD).
Device Menu – Displays the particular menu you are on/viewing (e.g., “INV SETUP” is the inverter
Setup menu, “CHG SETUP” is the charger Setup menu, “AGS METER” is the AGS Meter menu, etc.,)
System – Displays the top level information for the system.
Home – Displays the top level information for the port (device) selected.
“Up” Arrow – Denotes that more selections are available prior to the current selection.
“Left” Arrow – Denotes the current selection.
“Down” Arrow – Denotes that more selections are available after the current selection.
Display Type – Displays what type of action can be performed from the display. Such as:
edit – a menu with editable settings/values that have not been changed by the SELECT knob.
EDIT – a menu with editable settings/values that have been selected and changed.
Read – a read only menu, settings/values cannot be changed from this menu.
Select – top level menu, press SELECT knob to access sub-menus.
View – menu that with a press of SELECT knob accesses editable settings/values.
Port – Displays what port you are on/viewing. May be a main port (P#), an accessory port (P#A),
or the information displayed is from all ports (ALL).