Magnum Energy ME-RTR Router - Manual (Page 56)

©
2014 Magnum Energy, Inc. Page 48
Menu Maps
02I Input Volts AC2 1 115V 2 ---- 3 ---- 4 ---- 5 ---- 6 ---- ALL Read AC METER
02H Input Volts AC1 1 115V 2 ---- 3 ---- 4 ---- 5 ---- 6 ---- ALL Read AC METER
02G Inv/Chg AC Amps 1 -10A 2 ---- 3 ---- 4 ---- 5 ---- 6 ---- ALL Read AC METER
02F AC Input Amps 1-100A 2 ---- 3 ---- 4 ---- 5 ---- 6 ---- ALL Read AC METER
02E AC Load Amps 1-100A 2 ---- 3 ---- 4 --- 5 ---- 6 ---- ALL Read AC METER 02D Inv/Chg Sys Amps
(In/Out of Battery)
10 Amps AC ALL Read AC METER
01 DC Meters 02 AC Meters 03 Timers ALL Select METER
METER
01A DC Volts to Inv 1 29.6 2 ---- 3 ---- 4 ---- 5 ---- 6 ---- ALL Read DC METER
01B Inv/Chg DC Amps 1 -10A 2 ---- 3 ---- 4 ---- 5 ---- 6 ---- ALL Read DC METER
03A Charge Time 12.0 Hrs ALL Read TM METER
02B AC Output Hz 1 60.0 2 ---- 3 ---- 4 ---- 5 ---- 6 ---- ALL Read AC METER
02A AC Output Volts 1 115V 2 ---- 3 ---- 4 ---- 5 ---- 6 ---- ALL Read AC METER
02C System AC Amps: AC Load = 20 AAC AC Input = 30 AAC ALL Read AC METER
02 AC Meters 03 Timers 04 AGS Meters ALL Select METER
02D AC Input Volts AC1 = 115 VAC AC2 = 115 VAC P1 Read AC METER
01A DC Volts to Inverter = 29.6VDC P1 Read DC METER
01B Inv/Chg DC Amps (In/Out of Battery) -100 Amps DC P1 Read DC METER
P
01 DC Meters 02 AC Meters 03 Timers ALL Select METER
ALL Ports METER displays:
03B Days Since: Absorb/CV Done = 3 EQ Chg Started = 140 ALL Read TM METER
01 DC Meters 02 AC Meters 03 Timers P1 Select INV METER
Note:
Shaded displays below apply to MS-PAE or MSH
model inverters only (Exceptions: The 02H display only appears if a MSH model inverter is connected. The 02I display only appears if a MSH-RE model is connected).
P P P
R R
R R
R
R
R
R
R R
R
R R
02C Inv/Chg Amps (In/Out of Battery) 10 Amps AC P1 Read AC METER
02B AC Amps: AC Load = 20 AAC AC Input = 30 AAC P1 Read AC METER
02A AC Output 115 Volts / 60.0 Hz P1 Read AC METER
01 DC Meters 02 AC Meters 03 Timers P1 Select INV METER
R
R
R
P
Note
:
Refer to Section 7.2.5 for AGS METER displays
(Port-specific and ALL Ports) Note
:
Refer to Section 8.2.3 for BMK METER displays
(Port-specific and ALL Ports)
From System Home Screen: Press
Inverting
48.0VDC 24ADC ALL System Home
03A Charge Time 12.0 Hrs P1 Read TM METER
03B Days Since: Absorb/CV Done = 3 EQ Chg Started = 140 P1 Read TM METER
01 DC Meters 02 AC Meters 03 Timers P1 Select INV METER
P
R
Note:
Shaded displays below apply to MS-PAE or MSH
model inverters only (Exceptions: The 02D display only appears if a MSH model inverter is connected. The AC2 field in the 02D display only appears if a MSH-RE model is connected).
Port-specific METER displays (Inverter connected):
METER
R R
MS4024PAE Inverter Inverting 29.3VDC 0ADC P1 INV Home
PORT
until Port# with connected inverter appears
Press
Press
Figure 4-2, METER Button (ALL Ports & Port-specifi c) Menu Map