Magnum Energy ME-RTR Router - Manual (Page 52)

©
2014 Magnum Energy, Inc. Page 44
Setup
Figure 3-20, AGS Fault History
Port
H1 AGS Fault History
Fault VDC 10.0Hrs
25.0VDC 75F
P1 2 8:15P AGS
Days since fault
Time Menu
Screen name
AGS Time
Fault History Number
Status
AGS Temp AGS VDC
Figure 3-20: The top line displays the fault history number and the screen name. The second
line displays the AGS status and the amount of time the generator has been running. The third
line displays voltage to the AGS and the AGS temperature. The bottom line displays the port that
the fault occurred at, how many days ago the fault occurred, the time of the fault, and the menu
in which it occurred.
TECH: 05 SETUP PIN
This menu sets the password (PIN - Personal Identification Number) that locks/unlocks the SETUP
button menus.
Why should I use the PIN feature? This feature is useful when the operation of the inverter
has been set up by an experienced user or installer. Restricting access to the SETUP menus with
a password can avoid any unauthorized changes to your settings by inexperienced users.
Setting a PIN (unlocked SETUP button)
If a PIN has not been set, the SETUP menus are accessible to everyone (i.e., SETUP unlocked).
When you first enter the 05 SETUP PIN menu, “Set New PIN” displays on the second line. Press
the SELECT knob, the “Set SETUP PIN, Change PIN 0000” menu appears. The first “0” is blinking.
From the Set SETUP PIN, Change PIN 0000 menu:
1. Rotate the SELECT knob to the desired number 0-9, and then press SELECT.
Note: A display of “0000” indicates a PIN has not been set (this is the default setting).
2. Repeat Step 1 to set the remaining 3-digits until the desired PIN displays.
3. After pressing the SELECT knob for the last digit, the PIN is set. The Set SETUP PIN menu now
displays “Unlock SETUP” (blinking). Rotate the SELECT knob to access these options:
• Unlock SETUP – Press SELECT to unlock the SETUP button menus. “SETUP Unlocked”
displays. SETUP menus are now accessible to all.
• Lock SETUP – Press SELECT to restrict access to the SETUP button menus to only those
users with the new valid PIN. “SETUP Locked” displays. The new PIN must be entered to
access SETUP menus.
• Change PIN – Press SELECT to change the PIN. “Change PIN 0000” displays.
Entering the SETUP Menu When the PIN is Set and Locked
When you press the SETUP button and “SETUP Menu, Enter PIN= 0***” displays, this indicates
that a PIN has been set and the SETUP button menus are locked. The correct PIN must now be
entered in order to access the menu. If the incorrect PIN is entered, “Incorrect PIN” displays. There
is no limit on how many attempts can be made to enter the correct PIN number.
From the SETUP Menu, Enter PIN= 0*** menu:
1. Rotate the SELECT knob to the correct digit, and then press SELECT.
2. Repeat Step 1 to enter the remaining three digits of the existing PIN.
3. After pressing the SELECT knob for the last digit, access to the menu is permitted.
Info: After the correct PIN has been entered, you do not need to re-enter it again to
access another protected menu unless 5 minutes has passed without any button push.