Yaskawa MP2000 - Manual (Page 33)

TECHNICAL NOTE
File: MP2000_IndividualFunctionDocument_RevC 33/168
Doc Number:
EF.MCD.05.101 11/17/2005
Bit 0 Working holdCntrl
Goes High and remains high until block is complete or timer
times out.
Bit 1 Working Reserved Reserved
Bit 2 Working Reserved Reserved
Bit 3 Working Reserved Reserved
Bit 4 Working Reserved Reserved
Bit 5 Working Reserved Reserved
Bit 6 Working Reserved Reserved
Bit 7 Working Time-out Goes high when timer (TIME) runs out.
Bit 8 Working clrComnd Reserved
Bit F Working oneshotF Reserved
AW00002 Working Counter Counter register for time out timer.
AW00003 Working rdaMult Value for address offset to locate proper RDA
AW00004 Working Revision Revision level of block.