HEIDENHAIN TNC 407 (243 020) Service Manual - Manual (Page 86)

SERVICE MANUAL TNC
Issue:
01.09.1995
Page 72
If the error message OPERATING PARAMETERS ERASED
is displayed, reenter the machine parameters as follows:
Key Function
Clear error message
OPERATING PARAMETERS ERASED
Activate data transfer menu
If necessary: select desired machine parameter file
by pressing the arrow keys
Enter name of the MP file
(ASCII or numerical keys)
Soft key to download data
Soft key to end data transfer menu
Exit machine parameter mode
Clear error message
OPERATING PARAMETERS ERASED
Note:
With new software versions, new machine parameters may be available. If these machine parameters are
not comprised in the machine parameter list when downloading, they are set to the value 0. The correct
input values for these machine parameters must be entered subsequently.